Q: Is it safe to drive with C1708 active?

Depends on system — check specific symptoms.

Q: How much does it cost to fix C1708?

Repair costs typically range $50–$400. DIY diagnosis with a multimeter can save on labor.

Q: Will the warning light go off on its own?

If the fault is intermittent, the light may turn off after several drive cycles. However, the underlying issue should still be addressed. ---

This diagnostic article is an original guide created by AIscanAuto for educational and troubleshooting purposes. The technical information about OBD2 DTC codes is based on publicly available automotive diagnostic standards and industry best practices. External links provided are for additional reading and context only — they do not imply endorsement or ownership of third-party content. All repair procedures should be performed by qualified technicians.

DTC C1708: C1708 — Right Rear Center Sensor Circuit Short to Vbat: Causes, Symptoms & Fix

The C1708 OBD2 fault code relates to the Right Rear Center Sensor circuit. This is part of the vehicle's chassis control system. When the short to battery, the control module cannot properly monitor or regulate this system, which may affect braking, traction, stability, or suspension performance. At AIscanAuto, we help drivers quickly identify OBD2 trouble codes, understand their root causes, and find the right fix — with AI-powered diagnostics that go beyond basic code reading.

C1708 — Right Rear Center Sensor Circuit Short to Vbat: Causes, Symptoms & Fix

The C1708 OBD2 fault code relates to the Right Rear Center Sensor circuit. This is part of the vehicle's chassis control system. When the short to battery, the control module cannot properly monitor or regulate this system, which may affect braking, traction, stability, or suspension performance.

At AIscanAuto, we help drivers quickly identify OBD2 trouble codes, understand their root causes, and find the right fix — with AI-powered diagnostics that go beyond basic code reading.

Symptoms

System warning light
Intermittent operation
Possible module communication issues

Common Causes

Faulty component — internal damage or wear affecting the Right Rear Center Sensor
Wiring issues — broken, corroded, or chafed wires in the circuit
Connector problems — loose, oxidized, or moisture-damaged pins
a short to battery voltage is detected — connects the signal line directly to 12V, causing constant high voltage
Control module fault — rare, but the chassis control module may have an internal fault

Step-by-Step Diagnosis

Scan with OBD2 tool — Confirm C1708 is active. Check for additional chassis DTCs.
Visual inspection — Examine the Right Rear Center Sensor wiring and connector for corrosion or damage.
Check voltage and ground — Use a multimeter to verify proper reference voltage.
Test component — Compare readings to factory specs. A stuck or erratic signal confirms failure.
Check for shorts/opens — Perform continuity tests on the wiring between the component and control module.

Repair & Solutions

If the component is defective, replace the Right Rear Center Sensor with an OEM or quality aftermarket part.
Repair any damaged wiring or connectors using proper methods.
Clear the DTC with an OBD2 scanner and test drive to verify the code does not return.
If the code persists after component replacement, inspect the control module connector or consider module testing.

Related Codes

C1705 — Left Rear Center Sensor Circuit Short to Vbat
C1706 — Left Rear Center Sensor Circuit Failure
C1707 — Left Rear Center Sensor Circuit Fault

DTC C1708: C1708 — Right Rear Center Sensor Circuit Short to Vbat: Causes, Symptoms & Fix

C1708 Diagnostic Trouble Code

DTC C1708: C1708 — Right Rear Center Sensor Circuit Short to Vbat: Causes, Symptoms & Fix

C1708 — Right Rear Center Sensor Circuit Short to Vbat: Causes, Symptoms & Fix

Symptoms

Common Causes

Step-by-Step Diagnosis

Repair & Solutions

Related Codes

External References & Code-Specific Resources